WASTE TYRE PYROLYSIS PLANT
RC-10/16 MM - CAPACITY 10 TONS - WASTE TYRE PYROLYSIS PLANT
• MAIN REACTOR
Made with BQ Plate 516-70 GR Capsule Type (with two site dish end)--2.6 Miter x 6.6 Miter 16 MM Plate Door Size 1500 MM
FRONT DOOR FRONT SIDE CARBON REMOVAL SYSTEM ATTECHMEN extra Price
• REACTOR COVER
Cover 3 MM MS Sheet With insulated cera wool 1260 Temp 25 MM Two layer
• REACTOR ELECTRIC MOTOR
Motor -1 Nos 7.5 HP 960 RPM Motor for Process and 2 nd7.5 HP 1440 RPM • REACTOR GEAR BOX
•CONDENSER PIPE UNIT
•INSULATION TANK
• WATER SEAL TANK
• GAS TANK
• OIL TANK
• WATER COOLANT PIPE
• SCRUBBER COOLANT PIPE
• SCRUBBER FAN PIPE
• SCRUBBER "C "PIPE
• WET SCRUBBER ROUND TANK FOR DRAFT CONTROL
• DRAFT- CHIMNEY BLOWER
• STEEL PULING WIRE-ROPE HOIST
• FIRE BRICK & CASTABLE CEMENT
• CONTROL PENAL BOARD
• SUBMERSIBLE PUMP
• OIL GEAR PUMP
• MUD PUMP
• DRAFT CHIMNEY
• FIRE GAS FIRE BLOWER
• GAS BURNER
• COOLING TOWER
• HARDWARE AND FITTING
Hardware [ ball valve, pipe]--As per annexture I -Hardwarefor reactor pipe and pipe fitting
Minimum Order Quantity | 1 Number |
Type | Scrap Waste Tire Recycling Machine |
Capacity | 20 Ton / Day |
Automation Grade | Fully Automatic |
Motor Power | 100 HP |
Plant Capacity | 30 TONS PER DAY |
Melting Material | TYRE |
Plant Power Consumption | 100 HP |
Work Mode | Automatic |
1 Continuous Pyrolysis Machine Introduction :
· According to the continuous pyrolysis technology, the equipment we recommend in this proposal is the FAB Continuous Plant updated equipment of our company. It’s the new developed process, including continuous feeding system, continuous rotating pyrolysis system, continuous slagging system, continuous cooling system, smell removal system, continuous tail gas recycling system, continuous smoke cleaning system as well as PLC automatic control system, etc. The whole pyrolysis process is running under a completely sealed environment and on very high automatic control level, no need manual operation for feeding & slagging. The fully automatic and mechanical process makes sure the working environment is totally safe and clean.
The Advantages of the FAB Continuous pyrolysis machine
o Our Reactor has 360 Degree outside rotating system which allows it to heat proper way so it has long life,
o Spiral Flats are designed in to the reactor which helps running the material by its inner wall. The raw material direct contacted with the heat transfer surface and received immediate heat and evenly distributed.
o The reactor and feeder system adopts frequency drive (VFD) to adjust the retention time of raw material in the reactor according to the pyrolysis. It can decompose in minimum time to increase high oil yield.
o Reactor can be loaded by steel wire free tyre chips and It can also separate the carbon black from hair steel wires at the time of carbon discharge. It has hair steel in wires it can be collected by hair steel magnet separator machine. Hence it will be collected directly to the carbon bags if it doesn’t have hair steel in it.
Gas & oil burner can be used for extra flue uncondensed gas for secondary heating process of the pyrolysis reactor, which will reduce production cost and customer revenue. The flue gas after combustion is treated by dual wash scrubber system as per environment standards. Ii is using evaporated flue gas for heating process of reactor, where we recycle extra heat for the process· Pyrolysis Technology Safety Evaluation :
Leakage prevention |
Real-time monitoring of pressure and temperature |
Detection of flammable Gas |
Fire Fighting Systems |
Operating Training & Maintenance |
Backup Power & Water Supply |
4.4/5
Rated by 10 Users